The Haryana State Transport (Haryana Roadways), Office of the General Manager, Fatehabad Depot, has officially released the technical engagement notification for the Haryana Roadways Fatehabad Apprentice 2026. This direct technical apprenticeship drive invites male and female Industrial Training Institute (ITI) certificate holders across Haryana for designated industrial training slots. Candidates seeking trade apprenticeship training under the Haryana Roadways Fatehabad Apprentice 2026 can register their candidature online through the National Apprenticeship Promotion Scheme (NAPS) portal before reporting for physical verification.
What You Will Find Here
Candidates reviewing state technical appointments, mechanical tubewell machinery, and water pump operator cadres can inspect our detailed guide on the Yamuna Nagar Tubewell Operator Recruitment 2026 to evaluate technical trade benchmarks, operational logs, and selection procedures.
Selected candidates under the Haryana Roadways Fatehabad Apprentice 2026 framework undergo comprehensive hands-on workshop training across state roadways buses, covering engine overhauls, vehicular electrical wiring, chassis woodwork, and body repair. Unlike conventional recruitment drives, there is no preliminary written examination or viva-voce interview. Selection depends strictly on academic merit calculated from ITI aggregate percentage scores, followed by physical document verification at the General Manager’s office, Fatehabad Depot. Applicants must review the Haryana Roadways Fatehabad Apprentice 2026 eligibility rules, NAPS registration procedures, mandatory document checklists, and on-site reporting guidelines before submitting their applications.

Haryana Roadways Fatehabad Apprentice 2026: Master Overview
The table below summarizes the structural and administrative parameters governing the Haryana Roadways Fatehabad Apprentice 2026:
| Recruitment Attribute | Official Specifications & Institutional Details |
| Recruiting Department | Haryana State Transport (Haryana Roadways), Fatehabad Depot |
| Administrative Department | State Transport Department, Government of Haryana |
| Recruitment Session | Haryana Roadways Fatehabad Apprentice 2026 Training Cycle |
| Governing Statute | The Apprentices Act, 1961 & Apprenticeship Rules |
| Trades Covered | Electrician, Diesel Mechanic, and Carpenter |
| Total Vacancy Pool | 09 Designated Training Slots |
| Educational Benchmark | Matriculation (10th) + ITI Certificate in Relevant Trade (NCVT/SCVT) |
| Selection Architecture | 100% Direct Merit (ITI Aggregate Marks) + Physical Document Scrutiny |
| Application Submission Mode | 100% Online via NAPS Apprenticeship Portal |
| Application Processing Fee | ₹0/- (Completely Free for All Candidate Categories) |
| Monthly Stipend Slab | ₹7,700/- to ₹8,050/- Per Month (As per Apprenticeship Norms) |
| Physical DV Venue | Office of the General Manager, Haryana Roadways, Fatehabad Depot |
| Official Apprenticeship Portal | apprenticeshipindia.gov.in |
Important Dates & Operational Timetable
Candidates preparing their online submissions for the Haryana Roadways Fatehabad Apprentice 2026 must observe every operational milestone to track their application and verification schedules:
| Recruitment Milestone | Calendar Timeline & Operational Status |
| Official Notification Publication Date | 23 September 2026 |
| Opening of NAPS Online Application Window | 23 September 2026 |
| Closing Date for Online Form Submission | 27 September 2026 (Sharp at 05:00 PM) |
| Physical Document Verification at Depot | 28 September 2026 (09:30 AM Onward) |
| Declaration of Final Selection Merit List | 29 September 2026 (Notice Board & Portal) |
| Contract Generation on NAPS Portal | Within 3 to 5 Days Following Final Merit List |
| Commencement of Practical Workshop Training | First Week of October 2026 |
Trade-Wise Vacancy Distribution
The 09 industrial training slots under the Haryana Roadways Fatehabad Apprentice 2026 are allocated across mechanical and technical trades as follows:
| Trade Designation Name | Associated Industrial Department | Total Allocated Seats | Minimum Required ITI Trade |
| Electrician | Vehicular Electrical & Battery Maintenance | 05 Seats | ITI in Electrician Trade (2-Year Course) |
| Diesel Mechanic | Engine Overhaul & Heavy Vehicle Transmission | 03 Seats | ITI in Mechanic Diesel Trade (1-Year Course) |
| Carpenter | Bus Body Building & Interior Fitting | 01 Seat | ITI in Carpenter Trade (1-Year Course) |
| Total Available Slots | Haryana State Transport, Fatehabad Depot | 09 Seats | Certified NCVT / SCVT ITI Pass |
Monthly Stipend Structure & Apprenticeship Benefits
Candidates engaged through the Haryana Roadways Fatehabad Apprentice 2026 receive a monthly stipend in accordance with the Apprentices Act, 1961, and NAPS guidelines:
| Trade Qualification Category | Prescribed Training Tenure | Consolidated Monthly Stipend | Payment Mode |
| 1-Year ITI Trades (Diesel Mechanic / Carpenter) | 12 Months (1 Year) | ₹7,700/- Per Month | Direct Benefit Transfer (DBT) to Bank Account |
| 2-Year ITI Trades (Electrician) | 12 Months (1 Year) | ₹8,050/- Per Month | Direct Benefit Transfer (DBT) to Bank Account |
Important Service Conditions & Legal Nature:
- Purely Apprenticeship Training: This engagement is strictly an industrial training program under the Apprentices Act, 1961. It does not constitute regular government employment, nor does it guarantee absorption into Haryana State Transport.
- Direct Benefit Transfer (DBT): The monthly stipend is remitted directly into the candidate’s bank account linked with their identity profile via the NAPS portal.
- National Apprenticeship Certificate (NAC): Upon successful completion of the one-year training and practical assessment, apprentices receive the National Apprenticeship Certificate (NAC) issued by the National Council for Vocational Training (NCVT), which serves as a valuable qualification for railway and roadways technical recruitments.
In addition to state transport apprenticeships, candidates tracking judicial clerk and stenography vacancies can review our comprehensive guide on the Rewari Court Steno Bharti 2026 to evaluate shorthand speed benchmarks, typing rules, and application protocols.
Comprehensive Eligibility Criteria & Qualification Standards
To participate in the Haryana Roadways Fatehabad Apprentice 2026, applicants must meet the following mandatory conditions:
1. Mandatory Academic & Technical Credentials:
- Matriculation (10th Standard): Passed from a recognized Board of School Education with Hindi or Sanskrit as one of the subjects.
- ITI Trade Certificate: Must possess a valid National Trade Certificate (NTC) or State Trade Certificate (STC) issued by NCVT or SCVT in Electrician, Mechanic Diesel, or Carpenter trade.
- Discipline Match: Applicants may apply only for the specific trade matching their certified ITI trade diploma. Cross-trade applications are disqualified.
2. Domicile & Residency Requirement:
- The applicant must be a bonafide permanent resident of Haryana and possess a valid Haryana Resident / Domicile Certificate issued by a competent revenue authority (Tehsildar/SDM).
3. Apprenticeship Rule & Prior Training Bar:
- Candidates who have already completed an apprenticeship program, or who are currently undergoing training in any central, state, or private establishment, are strictly ineligible to apply.
4. Age Limit Parameters:
- Minimum Age: 14 Years completed as of the application date (standard statutory threshold under the Apprentices Act).
- Upper Age Ceiling: Generally up to 30 to 35 years in state government transport establishments, with standard age concessions applicable to SC, BC-A, BC-B, and PwD candidates as per state guidelines.
Selection Process & 100% Merit Calculation Architecture
The selection architecture for the Haryana Roadways Fatehabad Apprentice 2026 is completely transparent and objective:
[Online Application on NAPS Portal] ──► [System Merit Ranking via ITI Marks] ──► [Physical DV at Depot: 28 Sept] ──► [Final Merit List: 29 Sept] ──► [NAPS Contract Signing]
- Online Profile Shortlisting: Candidates apply online through the NAPS Apprenticeship portal (
apprenticeshipindia.gov.in). - Merit Compilation: A preliminary merit ranking is established based solely on the aggregate percentage of marks scored by the candidate in their ITI examination.
- Compulsory Physical Document Verification: Shortlisted candidates must report in person to the General Manager’s Office, Fatehabad Depot, on 28 September 2026 with all original credentials and photocopied sets.
- Tie-Breaking Principles: If two or more candidates achieve identical aggregate ITI percentages:
- The candidate older in age is placed higher on the merit rank.
- If age is also identical, higher percentage marks in the Class 10th (Matriculation) examination resolve the tie.
- Final Selection List Display: The finalized list of selected apprentices is displayed on the depot notice board and published via the NAPS portal on 29 September 2026.
Trade-Wise Hands-On Workshop Training Curriculum
Apprentices appointed under the Haryana Roadways Fatehabad Apprentice 2026 gain valuable practical experience inside the Fatehabad Depot mechanical workshops:
| Trade Designation | Workshop Sections & Practical Operations Learned |
| Electrician Trade | Alternator maintenance, starter motor servicing, dashboard electrical wiring, bus headlamp relays, battery charging and terminal testing, electronic sensor troubleshooting. |
| Diesel Mechanic Trade | BS-VI diesel engine overhauling, fuel injector calibration, turbocharger maintenance, gearbox and clutch plate assembly, hydraulic air brake servicing, steering alignment. |
| Carpenter Trade | Bus flooring repair, wooden framework reinforcement, passenger seat mounting, emergency door panel repairs, aluminum sheet riveting and weather-strip fitting. |
Mandatory Document Verification Checklist
Applicants appearing for physical document verification under the Haryana Roadways Fatehabad Apprentice 2026 on 28 September 2026 must present original documents alongside two self-attested photocopied sets:
| Document / Certificate Required | Purpose of Scrutiny & Formatting Instructions |
| NAPS Application Form Printout | Full printout of the submitted online apprenticeship application showing 100% profile completion. |
| Matriculation Certificate (10th) | Verifying candidate legal name, parentage, and exact date of birth. |
| ITI Marksheets (All Semesters/Years) | Consolidated semester/annual marks cards demonstrating marks obtained in the relevant trade. |
| National Trade Certificate (NTC) | Formal passing certificate issued by NCVT or SCVT. |
| Haryana Domicile Certificate | Official permanent resident certificate confirming state residency credentials. |
| Category / Caste Certificate | Valid certificate for candidates claiming SC, BC-A, BC-B, or EWS status. |
| Government Photo Identity Proof | Valid government ID, such as an official Voter ID, Passport, PAN Card, or Driving License. |
| Bank Account Passbook Copy | Clear copy of savings account passbook with active direct benefit transfer (DBT) linkage. |
| Passport-Sized Photographs | 4 to 6 recent color photographs matching the image uploaded to the NAPS portal. |
Step-by-Step Guide: How to Apply Online via NAPS Portal
Follow these steps to submit your application for the Haryana Roadways Fatehabad Apprentice 2026:
Step 1: Candidate Registration & E-KYC Verification
- Open your web browser and navigate to the official apprenticeship portal: apprenticeshipindia.gov.in.
- If you are a new applicant, click on Register in the top right corner and select Candidate.
- Complete your initial registration using your active mobile number and email ID, then verify via OTP.
- Log in to your candidate dashboard and complete your E-KYC verification using your personal identification credentials.
- Upload your profile photograph, educational details (10th standard), and ITI qualifications. Ensure your candidate profile status reflects 100% completed.
Step 2: Search Opportunity & Apply
- From the candidate dashboard, click on Apprenticeship Opportunities in the main navigation menu.
- In the Search by Establishment Name box, type:Plaintext
Haryana State Transport Fatehabad - The available trade opportunities for Fatehabad Depot will appear on screen.
- Locate your specific ITI trade:
- Electrician
- Mechanic (Diesel)
- Carpenter
- Click on the Apply button adjacent to your trade designation.
- Select your preferred primary location (Fatehabad Depot) and submit your application.
- Print the submitted application confirmation page and save the digital PDF receipt.
Step 3: Attend Physical Verification on 28 September 2026
- Prepare two complete sets of self-attested photocopies of all required educational, trade, domicile, and identity documents.
- Arrange all original documents in a folder.
- Report to the Office of the General Manager, Haryana State Transport, Fatehabad Depot, on 28 September 2026 by 09:30 AM.
- Submit your application portfolio at the scrutiny counter and present your original certificates for verification.
Physical Reporting Venue & Contact Address
The physical verification for the Haryana Roadways Fatehabad Apprentice 2026 takes place at the main depot administrative complex:
Office of the General Manager,
Haryana State Transport (Fatehabad Depot),
Near New Bus Stand, Fatehabad,
Haryana – 125050
[NAPS Portal Online Apply: By 27 Sept] ──► [Depot Arrival: 28 Sept (09:30 AM)] ──► [Original Certificate Scrutiny] ──► [Final Merit List: 29 Sept]
- Reporting Punctuality: Arrive at the depot complex before 09:30 AM on 28 September 2026. Late arrivals after the verification committee commences reviews may be disqualified.
- No Individual Postal Call Letters: The depot administration does not issue individual call letters or interview cards via post. Reporting in person on the designated date is entirely the applicant’s responsibility.
5 Practical Tips for Roadways Apprentice Applicants
- Verify 100% Profile Status on NAPS: Before applying, make sure your NAPS profile indicates 100% completion. Profiles with pending e-KYC or unverified father’s name/DOB records are often rejected during system-level screening.
- Carry Consolidated Original Trade Certificates: Do not rely solely on provisional web marksheets. Bring original NCVT/SCVT passing certificates along with all semester marksheets.
- Verify Active DBT Seeding in Your Bank Account: Monthly apprentice stipends under NAPS are credited via Direct Benefit Transfer. Ensure your savings bank account has active DBT mapping to avoid payment delays.
- Follow the Single Trade Policy: Apply strictly under the trade matching your ITI marksheet. Applying across multiple unrelated trades can lead to automatic application cancellation.
- Retain Multiple Photocopied Sets: Keep at least three photocopied sets of your NAPS application form and all enclosures to avoid last-minute issues on verification morning.
For the fastest real-time updates on upcoming Haryana government notifications, ITI apprentice recruitments, offline application forms, and competitive exam results, visit the RK Job Alert 24 Home Page to browse daily recruitment updates.
Common Mistakes to Avoid in Apprenticeship Applications
Many ITI graduates encounter avoidable rejections during administrative scrutiny due to procedural errors:
| Common Filing Oversight | Negative Consequence | Recommended Preventive Action |
| Incomplete NAPS Profile (<100%) | Automated portal filtering may exclude application. | Complete candidate e-KYC and upload all marksheets before applying. |
| Missing Document Verification Date | Automatic forfeiture of candidature. | Report directly to Fatehabad Depot on 28 September 2026 without waiting for an SMS. |
| Applying Without a State Domicile | Disqualification under state residency rules. | Ensure your Haryana Domicile Certificate is active and issued by a competent revenue officer. |
| Unlinked Bank Account for DBT | Stipend disbursements fail or experience extended delays. | Verify with your bank branch that your account is active for government DBT transfers. |
| Discrepancy in Matric vs ITI Name | Scrutiny failure at the depot desk. | Carry a gazette notification or sworn affidavit if name spellings differ between certificates. |
Important Direct Action Links
Use the verified links below to access the NAPS portal, review recruitment opportunities, and join employment alert groups:
| Essential Resource / Action Link | Direct Official Web Access Link |
| NAPS Apprenticeship Online Application Portal | Apply Online on NAPS Portal |
| Search Establishment (Fatehabad Depot) | Search Fatehabad Depot Opportunity |
| Haryana Transport Department Official Portal | Visit Official Haryana Transport Portal |
| Join WhatsApp Channel for Fast Alerts | Join Official WhatsApp Channel |
| RK Job Alert 24 Home Page | Visit rkjobalert24.com Home |
Frequently Asked Questions (FAQs)
What is the educational qualification for Haryana Roadways Fatehabad Apprentice 2026?
Candidates must have passed Class 10th (Matriculation) from a recognized education board and hold an ITI trade certificate (NCVT/SCVT) in Electrician, Diesel Mechanic, or Carpenter trade.
What is the last date to apply online for this apprenticeship drive?
Online applications on the NAPS portal (apprenticeshipindia.gov.in) must be completed on or before 27 September 2026.
When and where is the physical document verification conducted?
Physical document verification takes place on 28 September 2026 (starting at 09:30 AM) at the Office of the General Manager, Haryana State Transport, Fatehabad Depot.
Is there any application or processing fee?
No. The entire application process on the NAPS Apprenticeship portal is completely free of cost for all categories.
What monthly stipend will selected apprentices receive?
Apprentices receive a monthly stipend ranging from ₹7,700/- to ₹8,050/- per month depending on trade duration (1-year vs 2-year ITI trades) as per Apprenticeship Act rules.